The Ghost Immobiliser
Immobilisers are a potent tool in the fight against vehicle theft. They stop the car from starting if it isn't equipped with an identification card. They also work well to stop hotwiring or other traditional forms of vehicle theft. Newer methods such as key cloning and relay theft are becoming increasingly common.
The Ghost Immobiliser has been designed to counter these trends and make your vehicle unnoticeable. It doesn't rely on LED indicators, radio signals or key fobs. It is quiet and stealthy.
Easy to install
The Ghost Immobiliser is a groundbreaking device, connects to the CAN data network of your vehicle in order to stop key cloning and theft. It is a TASSA-approved device and insurance companies have endorsed it. It operates silently and is virtually undetectable to thieves. It uses buttons on your steering wheel, center console, and door panels to make an individual pin code sequence that has to be entered before you are able to start your car. You can create up to 20 different sequences to provide greater security. It's easy to install and doesn't require additional hardware.
To ensure the highest quality results, it is recommended that you select a reputable CAN immobiliser installer who is specialized in your particular vehicle. Ideally, they'll have a workshop in your area where you can go to get your installation done. They'll also have a range of tools and materials to assist you with the installation process. They will have basic hand tools, a multimeter, and insulation tape as well as heat shrink tubing to secure connections. A user's manual will offer instructions specific to the wiring in your vehicle.
Disconnect the battery before beginning the installation process to avoid short circuits or airbag deployment. Double-checking the CAN L and CAN H wires is crucial because a mistake in identification could result in a faulty integration of the system. It is also a good idea to label or mark the wires. Also, use a multimeter to verify that the power source identified is able to provide a consistent 12V power supply.
Advanced thieves employ a variety of strategies to get around Ghost Immobilisers. This includes jamming or spoofing. These methods involve amplifying signals from the key fob to your vehicle's electronic controller unit. With the latest anti-jamming technology and a constant monitoring system your vehicle, it can be protected from these sophisticated attacks.
Enhanced security
Ghost immobilisers offer an additional layer of protection to protect your vehicle from theft. It uses an PIN code protection system that is entered using existing buttons on the steering wheel or on your dashboard making it difficult for thieves to gain access to the device and steal your vehicle. The device is also designed to be hidden within your vehicle, without lights or other indicators that would warn thieves of its presence. It is directly connected to the ECU of your vehicle via the data bus. This means it is not susceptible to relay attacks or hacking.
The system is an excellent investment for those who own prestige vehicles, as they are at a higher chance of theft because of their value and popularity. Its security features are enhanced to protect against key duplicates, ECU swapping, and other threats to your vehicle's security. Some ghost immobilisers can also be connected to an app, allowing you can easily arm and disarm them. They also come with the option of a service/valet mode, which allows you to temporarily deactivate them while your vehicle is being repaired or serviced.
Another great feature of ghost immobilisers is that it does not require any cutting of wire. This is a great feature, especially if the vehicle is newer and doesn't have an immobiliser built in. Certain systems might also be able to integrate with an GPS tracking device, which can provide additional security for your vehicle. A GPS tracker may also reduce the cost of insurance. If you opt to buy an immobiliser for ghosts, make sure that it is TASSA verified and that a professional installer installs it for you.
ghost 2 immobiliser cost with all major makes and models
The Ghost Immobiliser is designed to be compatible with all major makes and models of vehicles protecting your pride and joy against theft. It uses buttons in your steering wheel, centre console, or door panels to generate an individual pin code which must be entered before you can drive your car. The system is tamper-proof, undetectable and backed by a three-year warranty. It is also fully approved by insurance companies. This means that you can reduce your costs.
The Ghost system is different from normal immobilisers, which use the key fob to provide ignition control. It connects directly to the engine controller through the CAN bus. It is nearly impossible to disable, remove or hack. In addition to this, Ghost is tamper-proof, meaning that it is virtually impossible to disable or remove. Ghost system can be connected with an secure iPhone application that permits remote management and monitoring.
You can choose an PIN code that is simple for you to remember but mathematically, it is impossible for thieves to guess. You can alter and customize the PIN at any time to ensure your vehicle's security, even if it is parked in a parking lot or on the street. You can also select a valet or service mode in case you need someone other than you to drive your vehicle for a short period, for example when it's in garage for servicing. This feature is also an excellent way to protect your car from being stolen by a shady mechanic. You can choose a Ghost Call alert to give you more peace of mind. It will notify you when your car is moving or has been moved.
Convenience
The ghost immobiliser shields your vehicle from common theft methods such as key replication or relay attacks. It works by connecting with the car's data network CAN and preventing communication with the engine ECU. This makes it very difficult for thieves to hack or replicate your vehicle.
Once the system is installed, you'll need to enter a PIN sequence up to 20 digits long using the buttons on your dashboard or steering wheel in order to start the engine. The system is completely hidden and undetectable to thieves, since it doesn't emit any radio frequency signals. It can be set up using a PIN number that is user-changeable, adding to its security. The system is designed to avoid cutting the circuit, making it nearly impossible to alter.
If you get lost in your PIN, there are some systems that let you communicate with the immobiliser via an app on your phone to disarm it immediately. Some systems also have a service/valet setting that allows you to temporarily to start your car for instance, when you drop it off at Valet Park or a garage.
The Ghost Immobiliser is also undetectable by thieves, since it does not transmit radio signals. This is a significant advantage compared to other security systems that are sold aftermarket. Additionally, it is simple to use and does not require any wiring that is complicated. It can be used combination with dash cams to provide additional security. Dash cams include the Thinkware F70, which features clear & crisp 1080p HD dashcam footage as well as Format Free Technology and parking mode. The system can be hardwired to ensure maximum performance and durability.
Installation
It is essential to select the most effective immobiliser ghost to protect your car from thieves. This device will help to prevent car theft by blocking the communication between the engine controller unit (ECU) and key fobs. This prevents thieves from intercepting the signal and copying the key fob to begin your car. It also can detect the moment it has been altered with and alert the owner of the vehicle.
The device is easy to install and integrates with the existing systems of your vehicle. It does not require any modification to the wiring in your vehicle and can be concealed in a concealed area, like under the dashboard. Follow the instructions in the manual to ensure the device is installed correctly. It is also crucial to test the system after installing it. This will confirm that the immobiliser ghost works exactly as it was intended to.
You can purchase an Autowatch Ghost 2 Immobiliser from an approved installer and get it installed in your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it difficult for thieves to steal the system or bypass it. The installation process typically takes between 2 and 3 hours.
It is recommended that you review the wiring diagram for your vehicle prior to the installation process. This will help you find the CAN High and Low wires. Low wires that are required to connect your Ghost to the engine of your vehicle. It is also essential to double-check the connections to make sure that they are secure and insulated.
After the installation is completed after which you can use the Ghost Immobiliser in normal operation. It will turn off the ignition of your vehicle if you don't start it with the correct PIN, which you will need to enter yourself. The ghost cost of immobilisers can also be set to Service/Valet mode in the event that you have to surrender your vehicle for maintenance or valet parking.